Optimum vibration adjustments with semi-active controlling equipment.
نویسندگان
چکیده
منابع مشابه
Semi-Active Pulse-Switching SSDC Vibration Suppression using Magnetostrictive Materials
One of the best vibration control methods using smart actuators are semi-active approaches which are as strong as active methods and need no external energy supply such as passive ones. Compared with piezoelectric-based, magnetostrictive-based control methods have higher coupling efficiency, higher Curie temperature, higher flexibility to be integrated with curved structures and no depolarizati...
متن کاملGeneric Vibration Criteria for Vibration-Sensitive Equipment
The vibration criterion (VC) curves, commonly used in the design of facilities which house vibration-sensitive instruments and tools, were developed by the author and his colleagues, in the early 80’s, published by SPIE in 1991 and by IEST in 1993. Each of the criterion curves A through E is associated with a “line width” or “detail size” which was an attempt by the authors to describe the capa...
متن کاملVibration budget for observatory equipment
Vibration from equipment mounted on the telescope and in summit support buildings has been a source of performance degradation at existing astronomical observatories, particularly for adaptive optics performance. Rather than relying only on best practices to minimize vibration, we present here a vibration budget that specifies allowable force levels from each source of vibration in the observat...
متن کاملOptimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE)
Landing impact and runway unevenness have proximate consequence on performance of landing gear system and conduce to discomfort of passengers and reduction of the pilot’s capability to control aircraft. Finally, vibrations caused by them result in structure fatigue. Fuzzy logic controller is used frequently in different applications because of simplicity in design and implementation. In the pre...
متن کاملInvestigation on the optimal properties of semi active control devices with continuous control for equipment isolation
The paper treats the semi active isolation of a single equipment, acceleration sensitive, by means of a variable elastic control device. A numerical study on a single degree of freedom (SDOF) structural model equipped with a continuously variable elastic device subjected to harmonic input is presented. The utilized control algorithm is derived by the Lyapunov method and specialized in order to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1988
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.54.1475