Optimum Design of Oil Lubricated Thrust Bearing for Hard Disk Drive with High Speed Spindle Motor
نویسندگان
چکیده
منابع مشابه
Experimental Performance Study of a High Speed Oil Lubricated Polymer Thrust Bearing
With the demand for turbomachinery to operate at higher speeds, loads, and power, fluid film bearings that support turbomachinery must be capable of operating in these more demanding applications. Thrust bearings operating at high speeds and loads can experience high surface temperatures and thin fluid film thickness. Typically, babbitt (white metal) is the bearing lining material for most turb...
متن کاملμ Control of a High Speed Spindle Thrust Magnetic Bearing
Experimental results demonstrate that μ synthesis provides an excellent tool for increasing the dynamic stiffness of thrust magnetic thrust bearings. Accurate system modeling and appropriate uncertainty descriptions are critical to obtaining such results and are described in detail. Both complex μ and mixed μ synthesis were used to design controllers. The performance of the μ controllers is com...
متن کاملA Thermal Elastohydrodynamic Lubricated Thrust Bearing Contact Model
A fully-coupled thermoelastic model for a fixed pad thrust bearing has been developed. Pressure, film thickness and three-dimensional temperature profiles were obtained by simultaneously solving the Reynolds, film thickness, energy and force balance equations using a combined finite difference and finite element method. The elastic deformation due to the pressure and the thermal distortion due ...
متن کاملA Baseline Theory for the Design of Oil-Lubricated Centrally Pivoted Plane-Pad Thrust Bearings
A baseline theory is developed in this paper for the design of oil-lubricated centrally pivoted plane-pad thrust bearings. By focusing on the hydrodynamics generated by the viscosity-temperature effects of the lubricating oil, a mathematical model is derived with a single dimensionless parameter Wth. The nominal value of Wth is 0.1 for typical pad bearings in current industrial practice. The th...
متن کاملComparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design
There are many types of bearings available, each used for different purposes and different conditions. Two major types of bearings are contact bearings and noncontact bearings. By considering the ball material, I separate the contact bearings to steel bearings and ceramic ball bearings. On the other hand, there are bearings that can run without any contact between the sliding surfaces in the be...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 2013
ISSN: 1023-621X,1542-3034
DOI: 10.1155/2013/896148