Optimum Design of Damper Bearing for Cylindrical Bearing-Rotor System.

The Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System

In this paper, the effectiveness of stiffness and damping of bearing is investigated on the natural frequencies of the rotor-bearing system. The rotor-bearing system consists of a shaft, two bearings and a disk between two bearings. Parallel spring-damper in horizental and vertical directions is considered for modeling the stiffness and damping of bearings. The gyroscopic effect is also conside...

On Stability Analysis of Bearing-Rotor System

The rotor system of the small power unit used in ball pen tip production machine, is discussed in detail. Meanwhile, nonlinear model of the rotor system is established and the related research method is introduced. Furthermore, the stability bifurcation of nonlinear periodic solution is obtained preliminarily. Characteristic comparisons between pseudo-periodic solution and chaotic one are put f...

Rotor-bearing System Dynamics of a High

Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE)

Crack fault of rotor is one of the most prominent problems faced by magnetic bearing rotor system. In order to improve the safety performance of this kind of machinery, it is necessary to research the vibration characteristics of magnetic bearing cracked rotor system. In this paper, the stiffness model of the crack shaft element was established by the strain energy release rate (SERR) theory. T...

Rotor Bearing System Analysis Using the Transfer Matrix Method with Thickness Assumption of Disk and Bearing

There are lots of different ways to find the natural frequencies of a rotating system. One of the most effective methods which is used because of its precision and correctness is the application of the transfer matrix. By use of this method the entire continuous system is subdivided and the corresponding differential equation can be stated in matrix form. So to analyze shaft that is this paper ...