Optimum design and analysis of flexure-based mechanism for non-circular diamond turning operation
نویسندگان
چکیده
منابع مشابه
fabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
Optimizing turning operation of St37 steel using grey relational analysis
Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...
متن کاملDeformation mechanism and optimum design for large cross-sectional longwall installation roadway under compound roof
Both the deformation characters and the failure mode of the large cross-sectional longwall installation roadway under compound roof are becoming an emergent issue than ever before due to the rapid development of modern mining equipment. Various engineering applications have revealed that the insufficient design and inappropriate support technology are the main reasons for the fatal accidents as...
متن کاملDesign and Control of a Piezo-based Fast Tool Servo System for Precision Diamond Turning
A novel fast tool servo driven by piezoelectric actuator for precision diamond turning is designed in this paper. To overcome the inherent hysteresis and drift nonlinearity effect of the piezoelectric actuator, a closed-loop control system is established using strain gauge integrated in the actuator for position feedback, which has compact structure and can avoid interference in the machining. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2017
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814017743353