OPTIMUM CUTTING CONDITIONS FOR CERAMIC-TIPPED TOOLS

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools

Two types of alumina-based cutting tools with compositions of 90 vol.% Al2O3+10 vol.% ZrO2 and 80 vol.% A12O3+20 vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast...

متن کامل

Research on Cutting Performance of Ceramic Cutting Tools in Milling High Density Fiberboard

The effect of cutting parameters and tool parameters on cutting forces and tool wear were investigated in high density fiberboard (HDF) peripheral up-milling using toughened ceramic cutting tools. The results showed that whether at low speed cutting or high speed cutting, the tangential forces Ft and normal forces Fr increased slowly with the increase of cutting length. The tangential forces Ft...

متن کامل

determining optimum conditions for sugarcane juice refinement by pilot plant dead-end ceramic micro-filtration

the conditions for the refinement of clarified sugarcane juice, including temperature (50o, 60o and 70oc) and pressure (0, 0.5, 1 and 1.5 bars) by micro-filtration membrane technology were investigated. the raw sugarcane juice was initially pre-filtrated with lime and then the juice obtained (clarified juice) processed using a ceramic micro-filter mem-brane (0.2 micrometer). the characteristics...

متن کامل

Optimum conditions for adsorptive storage.

The storage of gases in porous adsorbents, such as activated carbon and carbon nanotubes, is examined here thermodynamically from a systems viewpoint, considering the entire adsorption-desorption cycle. The results provide concrete objective criteria to guide the search for the "Holy Grail" adsorbent, for which the adsorptive delivery is maximized. It is shown that, for ambient temperature stor...

متن کامل

Comparison of Cutting Ceramics with Hard Metal Cutting Tools

Cutting ceramic tools are used especially at high cutting speeds in the machining process. The highly brittle type of structure and the tendency for cleavage (crack formation) are the infavorable properties of these materials, which keep their hardness at high temperatures. The hard metals are produced by sintering of the carbides such as whisker WC, TiC and TaC with the presence of Co as a bin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: The International Conference on Applied Mechanics and Mechanical Engineering

سال: 1986

ISSN: 2636-4360

DOI: 10.21608/amme.1986.57190