Optimum angle of incidence for monochromatic interference in transparent films on absorbing substrates

Antireflecting and polarizing transparent bilayer coating on absorbing substrates at oblique incidence.

Total refraction at oblique incidence by a transparent bilayer coating on a high-index transparent or absorbing substrate.

Total refraction at oblique incidence by a transparent bilayer coating on a high-index transparent or absorbing substrate," Appl. Transparent bilayer coatings that produce total refraction (TR) of obliquely incident monochromatic light into an underlying substrate are considered. When the substrate is transparent, it is shown that TR takes place without any accompanying change of polarization. ...

Single-layer antireflection coatings on absorbing substrates for the parallel and perpendicular polarizations at oblique incidence.

Single-layer antireflection coatings on absorbing substrates for the parallel and perpendicular polarizations at oblique incidence," Appl. Explicit equations are derived that determine the refractive index of a single layer that suppresses the reflection of p-or s-polarized light from the planar interface between a transparent and an absorbing medium at any given angle of incidence. The require...

Formation of Cupric Oxide Films on Quartz Substrates by Annealing the Copper Films

In the present work, cupric oxide (CuO) films were obtained through thermal annealing of the copper (Cu) films deposited on quartz substrates by DC magnetron sputtering method. The annealing was performed in air atmosphere for different times ranging from 60-240 min at temperature of 400 ºC. The influence of annealing times on structural and morphological properties of the films was investi...

Effect of side groups in polynorbornene films for transparent conductive substrates.

The imide-functionalized polynorbornene films exhibited excellent optical transparency in the visible range as well as high thermal stability over 200 degrees C. The indium tin oxide (ITO) thin films were coated on the imide-functionalized polynorbornene films at various deposition temperatures by employing radio-frequency (r.f.) planar magnetron sputtering system. The resulting ITO-coated imid...