Optimizing Piezoelectric Cantilever Design for Electronic Nose Applications
نویسندگان
چکیده
منابع مشابه
Design and Simulation of Piezoelectric MEMS Cantilever
In this paper, a Micro – Electrical Mechanical System (MEMS) energy harvester is developed, using the phenomenon of Piezoelectricity. Zinc Oxide (ZnO) was chosen as the piezoelectric material. A multi – d31 mode cantilever design was used with varying dimensions of cantilever, to form an array. The individual cantilevers can be either connected in series or parallel to achieve different output ...
متن کاملShape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester
The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectri...
متن کاملSensor Design for Piezoelectric Cantilever Beam Energy Harvesters
Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. A common device uses the piezoelectric effect for a cantilever beams at resonance to harvest ambient vibration energy. However most of these devices have a rectangular piezoelectric patch covering all or part of the beam. This paper considers the optimum desi...
متن کاملAn electronic nose for multimedia applications
Multimedia systems are widely used in consumer electronics environments today, where humans can work and communicate through multi-sensory interfaces. Unfortunately smell detection and generation systems are not part of today’s multimedia systems. In this paper, we propose an Electronic Nose that can be used in a multimedia environment. The proposed electronic nose can detect a large number of ...
متن کاملMiniature sensor suitable for electronic nose applications.
A major research effort has been devoted over the years for the development of chemical sensors for the detection of chemical and explosive vapors. However, the deployment of such chemical sensors will require the use of multiple sensors (probably tens of sensors) in a sensor package to achieve selective detection. In order to keep the overall detector unit small, miniature sensors with suffici...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemosensors
سال: 2020
ISSN: 2227-9040
DOI: 10.3390/chemosensors8040114