Optimizing influence of process parameters on induction hardening for IC engine valve
نویسندگان
چکیده
منابع مشابه
The influence of laser hardening on wear in the valve and valve seat contact
In internal combustion engines it is important to manage the wear in the valve and valve seat contact in order to minimise emissions and maximise economy. Traditionally wear in this contact has been controlled by the use of a valve seat insert and the careful selection of materials for both the valve and the insert. More recently, due to the increasing demands for both performance and cost, alt...
متن کاملResearch of Intake Valve Deactivation on Engine Performance
In this paper, the effect of the Intake Valve Deactivation (IVDA) on engine performance is investigated in detail. Based on an optimization platform with Genetic Algorithm (GA) and engine thermodynamic model, the characteristics of the engine volumetric efficiency and pumping loss were studied under the cam-drive, Single Intake Valve (SIV) and Dual Intake Valves (DIV) operating modes, and the e...
متن کاملResponse Surface Methodology for Optimizing Adsorption Process Parameters of Reactive Blue 21 onto Modified Kaolin
In this research modified Kaolin by Cetyltrimethylammonium bromide is used as an adsorbent for the removal of Reactive Blue 21 from aqueous solutions. Response Surface Methodology was used to study the effect of independent variables, such as Reactive Blue 21 dye concentration (20, 40, 60, 80 and 100 mg/L), time (10, 20, 30, 40 and 50), initial pH (2, 4, 6, 8 and 10) and modified Kaolin dosage ...
متن کاملOptimizing the controller IC for micro HDD process based on Taguchi methods
The future trend of controller integrated circuit (IC) for micro hard disk driver (HDD) is to be lighter, thinner, shorter and smaller. The storage capacity and unit cost of micro HDD is lower than of flash memory card. The optimal packaging manufacturing process for driver IC for micro HDD is Chip Scale Package (CSP). However, the production and assemble process for CSP is much more difficult....
متن کاملOn the Influence of Riveting Process Parameters on Fatigue Life of Riveted Lap Joint
In this paper, influence of riveting process parameters, namely, riveting force, sheet thickness, friction coefficient and clearance fit are investigated on residual stress field and fatigue life of single riveted lap joint of AA2024 type. According to the effect of riveting induced residual stresses on fatigue life of riveted lap joint, these parameters are optimized to maximize the residual s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Science and Technology
سال: 2010
ISSN: 0974-6846,0974-5645
DOI: 10.17485/ijst/2010/v3i7.3