Optimizing Cement Quarry Dust Ratio in Concrete Asphalt Using for Industrial Purposes
نویسندگان
چکیده
Scarcity and the high cost of natural river sand due to government restrictions are major problems for construction industry. It was observed that cement quarry dust ratio is higher in concrete mixes compared conventional used highway projects effects influenced by shape, surface & content micro fines dust. In this study, ratios were optimized obtain optimum strength, workability use using industrial purposes. Workability, compressive strength tests conducted on basic three grade which vary percentage from 0.41 0.43 according British design approach. Workability designed M20, M30 M40 has shown lower strengths M20 0.42 mixes. Cost analysis indicates reduction stands between 27% 31% than can be concluded – QD purposes as a replacement superplasticizer, mix with enhancing Further, it effective
منابع مشابه
Experimental Investigation on Self Compacting Concrete Using Quarry Dust
This study presents an experimental investigation on self-compacting concrete (SCC) with fine aggregate (sand) replacement of a Quarry Dust (QD) (0%, 25%, 50%, 75%, 100%) and addition of mineral admixtures like Fly Ash (FA) and Silica Fume (SF) & chemical admixtures like super plasticizers (SP). After each mix preparation, 45 cubes specimens and 45 cylinders specimens are cast and cured. The sp...
متن کاملA Study on Strength of Concrete With Partial Replacement Of Cement With Quarry Dust And Metakaolin
Concrete a composite material made from cement, water, fine aggregate and coarse aggregate. But present researchers are in interest of finding new cement materials by waste materials or waste products produced from industries which are harmful to environment. The present paper deals with partial replacement of cement with quarry dust and metakaolin which are having silica used as admixture for ...
متن کاملCharacterisation of Asphalt Concrete Using Nanoindentation
In this study, nanoindentation was conducted to extract the load-displacement behaviour and the nanomechanical properties of asphalt concrete across the mastic, matrix, and aggregate phases. Further, the performance of hydrated lime as an additive was assessed across the three phases. The hydrated lime containing samples have greater resistance to deformation in the mastic and matrix phases, in...
متن کاملEffective Utilization of Crusher Dust in Concrete Using Portland Pozzolana Cement
The purpose for taking up this investigation owing to the fact that now a days natural sand confirming to Indian Standards is becoming scarcer and costlier due to its non availability in time because of Law of Land, illegal dredging by sand mafia, accessibility to the river source during rainy season, non confirming with IS 383-1970. Hence the present investigation was taken up with a view to v...
متن کاملElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CINEC Academic Journal
سال: 2022
ISSN: ['2792-100X']
DOI: https://doi.org/10.4038/caj.v5i2.107