Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method

Granular Ferric Hydroxide for Elimination of Arsenic from Drinking Water

Kinetics and Thermodynamic Study of Nitrate Adsorption on Granular Ferric Hydroxide

This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Application of Granular Ferric Hydroxide in Removal of Nitrate from Aqueous Solutions

The aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (GFH). The effect of factors such as initial concentration of nitrate, pH, contact time, and adsorbent mass were determined. The study was done in laboratory–scale in which synthetic nitrate solutions in a batch reactor were placed in contact with the adsorbent to model adsorption kinetics. It was found ...

the use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach

abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...