Optimized fabrication of high-quality La0.67Sr0.33MnO3thin films considering all essential characteristics
نویسندگان
چکیده
منابع مشابه
Fabrication of graphene films with high transparent conducting characteristics
We present a study on the transparent conducting characteristics of graphene-based films prepared by means of rapid chemical vapor deposition. The graphene films were grown on quartz slides with a CH4/Ar mixed gas under a constant flow at 950°C and then annealed at 1,000°C. It was found that the graphene films present excellent electrical conductivity with high transparency. The conductivity is...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملFabrication of high quality microarrays.
Fabrication of DNA microarray demands that between ten (diagnostic microarrays) and many hundred thousands of probes (research or screening microarrays) are efficiently immobilised to a glass or plastic surface using a suitable chemistry. DNA microarray performance is measured by parameters like array geometry, spot density, spot characteristics (morphology, probe density and hybridised density...
متن کاملFabrication and Characteristics of RF Magnetron Sputtered ITO Thin Films
Indium tin oxide (ITO) films have been deposited onto glass substrates by ifmagnetron sputtering without insitu substrate heating. The as-deposited films have an electrical resistivity of 5x1O a-cm, visible transmittance of about 85%, and infrared (IR) reflectance of above 80% at 5 jim. The effect of sputtering parameters on the deposition rate and the electrical and optical properties of ITO f...
متن کاملFabrication of high-quality single-crystal Cu thin films using radio-frequency sputtering
Copper (Cu) thin films have been widely used as electrodes and interconnection wires in integrated electronic circuits, and more recently as substrates for the synthesis of graphene. However, the ultra-high vacuum processes required for high-quality Cu film fabrication, such as molecular beam epitaxy (MBE), restricts mass production with low cost. In this work, we demonstrated high-quality Cu t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics D: Applied Physics
سال: 2011
ISSN: 0022-3727,1361-6463
DOI: 10.1088/0022-3727/44/20/205001