Optimization on Wear Rate of AA2219/Nanographite/TiB2/Si3N4 Hybrid Composites Using Taguchi Process
نویسندگان
چکیده
The various following reinforcements like nanographite, titanium diboride (TiB2), silicon nitride (Si3N4), and aluminum 2219 have all been investigated in this study. Current research suggests that TiB2 graphite may be a suitable reinforcement for Al2219 alloy. stir casting process was used to make reinforced composites on unreinforced Al2219. Compared the Al2219, nanographite-reinforced hybrid showed exceptional wear resistance (30%) at 175°C. Matrix strengthening kinetics is improved 175°C when nano-Gr particles are present. To obtain p value less than 1% an absolute relative error of 1%, artificial neural network employed.
منابع مشابه
Experimental Study on Wear Behaviour of Sic Filled Hybrid Composites Using Taguchi Method
The popularity of composite materials usage is increasing due to its superior strength characters racing the traditional materials in strength to weight ratio. The developments of new materials are on the anvil and are growing day by day. In this work, two-body abrasive wear test with different loads and abrading distances were performed at room temperature by using a pin on a disk apparatus to...
متن کاملParametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm
The present investigation proposes a hybrid technique: Taguchi method, response surface methodology (RSM) and genetic algorithm (GA), to analyze, model and predict vibration and surface roughness in traverse cut cylindrical grinding of aluminum alloy. Experiments have been conducted as per L9 orthogonal array of Taguchi methodology using several levels of the grinding parameters. Analysis of va...
متن کاملOptimization of Process Parameters in Drilling of Smc Composites Using Taguchi Method
Original scientific paper This paper has presented and discussed machinability in the drilling of SMC (Sheet Mould Compound) A-Class composite materials using Taguchi's DoE method. The thrust forces, surface roughness and push-out peel-up delamination behaviour in drilling process for glass fibre reinforced SMC composites have been evaluated. The experimental results and the contribution ratio ...
متن کاملTHE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE
The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that inf...
متن کاملTaguchi Design optimization using multivariate process capability index
The Taguchi method is a useful technique to improve the performance of products or processes at a lower cost and in less time. This procedure can be categorized in the static and dynamic quality characteristics. The optimization of multiple responses has received increasing attention over the last few years in many manufacturing organizations. Several approaches dealing with multiple static q...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nanomaterials
سال: 2022
ISSN: ['1687-4110', '1687-4129']
DOI: https://doi.org/10.1155/2022/1814623