Optimization of Wear Parameters of aluminium composites (AA6082/12wt%ZrO2) utilizing Taguchi technique
نویسندگان
چکیده
منابع مشابه
THE EFFECT OF VARIOUS PARAMETERS ON DRY SLIDING WEAR BEHAVIOR AND SUBSURFACE OF AGED HYBRID METAL MATRIX COMPOSITES USING TAGUCHI TECHNIQUE
The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that inf...
متن کاملWear behaviour of AA6061 aluminium alloy and its composites
This study investigates the wear resistance of four AA6061 MMCs together with the monolithic AA6061 alloy, all in the T6 condition, using a pin-on-disc test. In addition to the widely studied 20 vol.% Saffil MMCs, the present investigation considered a hybrid of 11% Saffil + 20% Sic, and a high volume fraction Sic, MMC. AA6061 + 60% Sic,. The wear behaviour against P400 Sic grit adhesive bonded...
متن کاملParticle effects on friction and wear of aluminium matrix composites
Particle effects on friction and wear of 6061 aluminium (6061 AI) reinforced with silicon carbide (SIC) and alumina (AI203) particles were investigated by means of Vickers microhardness measurements and scratch tests. Unreinforced 6061 AI matrix alloy was also studied for comparison. To explore the effect of heat treatment, materials subjected to three different heat treatment conditions, i.e. ...
متن کاملOptimization of cryogenic treatment parameters to maximise the tool wear of HSS tools by Taguchi method
This work describes the optimization of cryogenic treatment (CT) parameters such as the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time to maximise the tool wear of high speed steel tools in dry turning of AISI 316 grade austenitic stainless steels by Taguchi method. For this purpose, four iteration of Taguchi design (L16) have been used...
متن کاملOptimization of Machining Parameters in ECM of Al/B4C Composites Using Taguchi Method
Aluminium metal matrix composites (AMMCs) are now gaining their usage in aerospace and automotive industries because of their inherent properties like high strength to weight ratio, low wear rate etc. Electrochemical Machining (ECM) allowed success in the production of newer materials, especially for the aerospace and biomedical applications. In this paper an attempt is made to machine the LM6 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/988/1/012124