Optimization of vacuum brazing process parameters in AA6061 using Taguchi method
نویسندگان
چکیده
منابع مشابه
Optimization of vacuum brazing process parameters in AA6061 using Taguchi method
Vacuum brazing products have excellent joining quality, less deformation and fewer residual stresses. The vacuum brazing technique has significant effect on the microstructure and property of the aluminum brazed joint, but there is little discussion about the optimization of the process. This study investigates how different process parameters affect the tensile properties of 6061-T6 aluminum v...
متن کاملOptimization of Process Parameters Using Taguchi Technique in Severe Surface Mechanical Treatment of AA6061
Many engineering applications demand materials with hard surface and tough core. In the present study, the enhancement of this combination of properties was achieved in aluminium alloy AA6061 by Severe Surface Mechanical Treatment (SSMT). The process parameters were optimized using Taguchi L9 orthogonal design of experiments. The size of shots, speed of revolution of shaft and duration of treat...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملOptimization of Process Parameters in Drilling of Smc Composites Using Taguchi Method
Original scientific paper This paper has presented and discussed machinability in the drilling of SMC (Sheet Mould Compound) A-Class composite materials using Taguchi's DoE method. The thrust forces, surface roughness and push-out peel-up delamination behaviour in drilling process for glass fibre reinforced SMC composites have been evaluated. The experimental results and the contribution ratio ...
متن کاملOptimization of Process Parameters in Turning of AISI 8620 Steel Using Taguchi and Grey Taguchi Analysis
The aim of this research is to investigate the optimization of cutting parameters (cutting speed, feed rate and depth of cut) for surface roughness and metal removal rate in turning of AISI 8620 steel using coated carbide insert. Experiments have been carried out based on Taguchi L9 standard orthogonal array design with three process parameters namely cutting speed, feed rate and depth of cut f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2016
ISSN: 1881-3054
DOI: 10.1299/jamdsm.2016jamdsm0031