Optimization of the Perturbation Amplitude for Impedance Measurements in a Commercial PEM Fuel Cell Using Total Harmonic Distortion
نویسندگان
چکیده
منابع مشابه
Energy Management Simulation in a PEM Fuel Cell System
In this research the simulation of an air independent Proton Exchange Membrane Fuel Cell (PEMFC) propulsion system was taken into consideration. The system consists of several parts including PEM fuel cell stack, metal hydride and liquid oxygen (LOX) tanks, and also pre-heaters of oxygen and hydrogen gases along with other heat exchangers, to ensure proper operation of system. The heat recovery...
متن کاملPEM fuel cell electrodes
The design of electrodes for polymer electrolyte membrane fuel cells (PEMFC) is a delicate balancing of transport media. Conductance of gas, electrons, and protons must be optimized to provide efficient transport to and from the electrochemical reactions. This is accomplished through careful consideration of the volume of conducting media required by each phase and the distribution of the respe...
متن کاملError Analysis of the Impedance Response of PEM Fuel Cells
A measurement-model-based error structure analysis was applied to impedance data collected under galvanostatic modulation for a single 5 cm2 polymer electrolyte membrane PEM fuel cell. The stochastic errors were found to be roughly independent of frequency and were similar for the two instruments used. The measurement-model approach was found to be capable of identifying both high-frequency and...
متن کاملWater Management in the Cathode Side of a PEM Fuel Cell
A one dimensional isothermal mathematical modeling of cathode side of a Proton Exchange Membrane (PEM) fuel cell is developed for the water management problem. Water transport is investigated in both cathode Gas Diffusion Layer (GDL) and membrane through solving appropriate equations for fluid flow and mass transport in GDL and water transport within the membrane. The gaseous mixture flowing in...
متن کاملParametric Study of Operation and Performance of a PEM Fuel Cell Using Numerical Method
Output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. In this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. Effect of oxygen concentration at gas diffusion layer entrance, temperature and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel Cells
سال: 2016
ISSN: 1615-6846
DOI: 10.1002/fuce.201500141