Optimization of Tensile and Impact Strength for Injection Moulded Nylon 66/Sic/B4c Composites
نویسندگان
چکیده
The mechanical properties of different polymer matrix composites are discussed in this research study. These multiphase materials which reinforcing elements and a suitably combined. 18 PMCs, including nylon 66 reinforced with 5, 15, 25% wt% silicon carbide (SiC) boron (B4C), were evaluated using an injection moulding technique at three pressures optimization process parameters like reinforcement material, quantity, pressure to maximize the tensile impact strength main focus It is observed that specimens SiC 90 MPa has optimised strength, while specimen 5% B4C strength.
منابع مشابه
INTRAPLY HYBRID COMPOSITES BASED ON BASALT AND NYLON WOVEN FABRICS: TENSILE AND COMPRESSIVE PROPERTIES
In this study, the tensile and compressive behaviors of pure and hybrid composite laminates reinforced by basalt–nylon bi-woven intra-ply fabrics were experimentally investigated. Epoxy resin was used as the matrix material. The purpose of using this hybrid composite is to obtain superior characteristics by using the good strength property of basalt fiber with the excellent toughness of ny...
متن کاملTensile Strength Analysis of bamboo and Layered Laminate Bamboo composites
Tensile properties of bamboo laminae, prepared from bamboo slivers, selected from different regions of bamboo culms (Dendrocalamus strictus), increases from inner to outer region for any cross section and the same is experienced from bottom to top. Application of rule of mixture, on linear regression line drawn from test results, show that fiber strength increases and matrix strength decreases ...
متن کاملExperimental Study of Mechanical Stabilization impact on Improving Compressive, Tensile and Flexural Strength of Adobe
Iran is one of the oldest countries in the world benefiting from adobe-based architecture; a method which has long been forgotten in the contemporary architecture of country. Considering the important role of Earth Blocks such as adobe in the world’s contemporary architecture and the wealth of Iranian adobe-based monuments, it is necessary to continue contemplating on ways to optimize adobe to ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Experimental investigation on the mechanical properties of glass fiber reinforced nylon
In this study, the influence of different weight percentages of glass fiber (GF) reinforcement on the mechanical properties of nylon (PA6) composite is investigated. Test specimens of pure nylon, 95% nylon + 5% GF, 90% nylon + 10% GF, 85% nylon + 15% GF and 80% nylon + 20% GF are prepared using an injection molding machine. In the experiments, tensile tests and impact tests are carried out. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nanomaterials
سال: 2022
ISSN: ['1687-4110', '1687-4129']
DOI: https://doi.org/10.1155/2022/4920774