Optimization of Slag Content and Properties Improvement of Metakaolin-slag Geopolymer Mixes

Effect of Slag, Natural Pozzolana and Metakaolin on Mortar Properties

The objective of this study is to examine the effect of substitution of cement by three different mineral additions, on the mortar rheological and mechanical properties. This experimentation, considers the fineness of mineral additives with a constant workability. Ordinary Portland Cement was partially replaced by different percentages of slag, pozzolana and metakaolin of 10, 20 and 30%. The ob...

Steel Slag Utilization in Asphalt Mixes

Steel slags are the major byproduct from the conversion of iron to steel in the basic oxygen (major type), electric arc and open hearth (minor type) steelmaking processes. Steel recovery from the slag results in a processed aggregate with both positive (wear resistant, skid resistant, rough textured, angular, well graded, stripping resistant) and negative (heavy, expansive) features. Considerab...

The Estimation of Slag Properties

SELF-Cured Alkali Activated Slag Concrete Mixes- An Experimental Study

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

Application-Oriented Chemical Optimization of a Metakaolin Based Geopolymer

In this study the development of a metakaolin based geopolymeric mortar to be used as bonding matrix for external strengthening of reinforced concrete beams is reported. Four geopolymer formulations have been obtained by varying the composition of the activating solution in terms of SiO₂/Na₂O ratio. The obtained samples have been characterized from a structural, microstructural and mechanical p...