Optimization of resistance spot welding parameters for microalloyed steel sheets
نویسندگان
چکیده
منابع مشابه
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation
In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...
متن کاملDissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel
In this paper, dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel is investigated experimentally. For this purpose, the experiments are designed using response surface methodology and based on four-factor, five-level central composite design. The effects of process parameters such as welding current, welding time, cooling time and electrode force are inv...
متن کاملA Review on different optimization techniques used to optimize the process parameters of Resistance spot welding
Resistance spot welding process is one of the very useful and widely utilized joining processes in automobile industry due to its high working speed, high productivity, flexibility and economical cost operation. In this paper various optimization techniques like Taguchi method, Artificial neural network (ANN), Genetic algorithm (GA) etc. and their applications are discussed to get the optimum w...
متن کاملDesign Parameters Selection and Optimization of Weld Zone Development in Resistance Spot Welding
This paper investigates the development of weld zone in Resistance Spot Welding (RSW) which focuses on weld nugget and Heat Affected Zone (HAZ). The effects of four factors namely weld current, weld time, electrode force and hold time were studied using a general 2 factorial design augmented by five centre points. The results of the analysis showed that all selected factors except hold time exh...
متن کاملInvestigation of structural changes in resistance spot welding of advanced high strength steel DP590
The structural and hardness developed in advanced high-strength steel DP590 have been investigated with the help of optical microscopy and scanning electron microscopy on resistance spot welded specimens. The hardness diagram of the weld sections was prepared by microhardness test and the temperature peak and heat distribution were simulated by menas of the Abaqus software. The results show tha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Engineering
سال: 2016
ISSN: 2391-5439
DOI: 10.1515/eng-2016-0069