OPTIMIZATION OF RADIOFREQUENCY HEATING OF IN-SHELL EGGS THROUGH FINITE ELEMENT MODELING AND EXPERIMENTAL TRIALS
نویسندگان
چکیده
منابع مشابه
Optimization of Radio Frequency Heating of In-shell Eggs through Finite Element Modeling and Experimental Trials
Considering Radio Frequency (RF) heating as a viable alternative for the in-shell heating of eggs, Finite Element Modeling and simulation of RF heating of in-shell eggs at 27.12 MHz were carried out to assess the feasibility and heating uniformity of the process. According to the recommendations of USDA-FSIS for the pasteurization of eggs, egg white must be heated up to 57.5◦C, and the egg yolk...
متن کاملFinite Element Modeling and Experimental Study of the Spline Tube Forming
Metal forming processes, compared with machining ones, reduce production steps and increase manufacturing speed in addition to saving raw material. In this paper, forming process of column of a steering mechanism is investigated by finite element analyses and experimental tests; and optimum die design parameters are found. Forming process parameters including die opening angle, bearing length, ...
متن کاملFinite Element Modeling and Experimental Study of the Spline Tube Forming
Metal forming processes, compared with machining ones, reduce production steps and increase manufacturing speed in addition to saving raw material. In this paper, forming process of column of a steering mechanism is investigated by finite element analyses and experimental tests; and optimum die design parameters are found. Forming process parameters including die opening angle, bearing length, ...
متن کاملSimulation and Validation of Radio Frequency Heating of Shell Eggs
.................................................................................................................... 26 3.
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress In Electromagnetics Research B
سال: 2012
ISSN: 1937-6472
DOI: 10.2528/pierb12091809