Optimization of Process Parameters of Friction Stir Welded Mg alloys for Maximizing Mechanical Propertie
نویسندگان
چکیده
منابع مشابه
Assessment of the Influence Process Parameters in the Friction Stir Welded Mechanical and Corrosion Properties of AA5754 Alloys
Friction Stir Welding (FSW) has been applied to AA5754-H111 alloy. An in-depth analysis of the influence of the process parameters has been performed using Taguchi method. Through the optimization of the process parameters it has been observed what the best process conditions for the different mechanical properties. It was observed that for tensile properties the best that lower advancing speed...
متن کاملOptimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys
Electron beam welding has shown a remarkable job in the space industry for welding of components. It is performed under a vacuum environment that eliminates foreign matter such as hydrogen, oxygen, and other gases. Joining of similar and dissimilar materials is the main advantage of electron beam welding with high depth to width ratio as well as sharp focus at the point where parts are to be we...
متن کاملThe Strength of Friction Stir Welded and Friction Stir Processed Aluminium Alloys
Local strength of friction stir (FS) welds and FS processed aluminium alloys in heat treatable aluminium alloys is dominated by precipitation hardening. Strengthening due to stored dislocations is generally limited to 40MPa, and grain size strengthening is generally less than 10MPa. Local crystallographic texture can cause yield strength variation on the order of 5%. Published models for streng...
متن کاملOptimization of process parameters during Friction Stir Welding of Aluminium 5083 & 6082 Alloys
The paper deals with the optimization of welding parameters of friction stir welding of different Aluminium alloy groups. For this purpose 5 series Aluminium alloy Al 5083 and 6 series Aluminium alloy Al 6062 were taken .Tensile Strength test and micro structure analysis under various rotating speeds and tool profiles is conducted. It is observed that the increase in tool rotation speed and the...
متن کاملexperimental investigations of microstructure of al 1100 alloys welded by friction stir welding process
in this paper, hardness and tensile properties of welded zone of aluminum 1100 alloys by friction stir welding process was investigated and the effects of rotational and traverse speeds of tool on these parameters was studied. also the fracture cross-section of welded samples was investigated. according the results of this paper, the hardness of weld material is higher than base material and is...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2021
ISSN: 2321-9653
DOI: 10.22214/ijraset.2021.34907