Optimization of process parameters for thermal shock resistance and thermal barrier effects of 8YSZ thermal barrier coatings through orthogonal test
نویسندگان
چکیده
منابع مشابه
THE EFFECTS OF PLASMA SPRAY PARAMETERS ON THE MICROSTRUCTURE AND PHASE COMPOSITION OF THERMAL BARRIER COATINGS MADE BY SPPS PROCESS
In this paper the effect of plasma spray parameters, atomizing gas and substrate preheat temperature on microstructure and phase composition of YSZ coatings produced by SPPS process have been investigated. The experimental results showed that increasing the power of plasma, using hydrogen as the precursor atomizing gas and increasing substrate preheat temperature decrease the amount of non-pyro...
متن کاملMicrostructural investigations of EBPVD thermal barrier coatings
This paper deals with the morphology, constitutive phases and fine microstructures of some EBPVD processed yttria partially stabilized zirconia thermal barrier coatings. This study has been performed by X-ray diffraction and scanning and transmission electron microscopy. It was shown that the coatings studied were constituted of a single metastable tetragonal t' phase, as expected if one refers...
متن کاملThermophysical properties of thermal barrier coatings
Thin layers of thermal barrier coating (TBCs) are applied to metallic components of heat engines to reduce metal temperatures and to provide environmental protection. This results in increased engine efficiency and prolonged operational life. Of special current interest is the use of TBCs in aircraft engines. The TBCs, often yttria-stabilized zirconia (YSZ), are deposited on nickel or cobalt-ba...
متن کاملDelamination resistance of thermal barrier coatings containing embedded ductile layers
Micromechanical models are developed to explore the effect of embedded metal layers upon thermal cycling delamination failure of thermal barrier coatings (TBCs) driven by thickening of a thermally grown oxide (TGO). The effects of reductions in the steady-state (i.e. maximum) energy release rate (ERR) controlling debonding from large interface flaws and decreases in the thickening kinetics of T...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2021
ISSN: 2158-3226
DOI: 10.1063/5.0053054