Optimization of Process Parameters by Response Surface Methodology for Methylene Blue Removal Using Cellulose Dusts
نویسندگان
چکیده
منابع مشابه
Removal of methylene blue from aqueous solution using nano-TiO2/UV process: Optimization by response surface methodology
This work describes the photocatalytic removal of methylene blue from aqueous solution by titanium dioxide nanoparticles under ultraviolet irradiation in a batch system. The effect of operational parameters such as irradiation time, nano titanium dioxide dosage, pH and initial methylene blue concentration were analyzed and optimized by response surface methodology in the nano titanium dioxide/u...
متن کاملOptimization of removal of methylene blue by Platanus tree leaves using response surface methodology.
Platanus tree leaves were successfully used as a novel sorbent for removing of methylene blue (MB) dye from aqueous solutions. A 2(3) full factorial design was performed for screening of the main factors. The pH, initial concentration of dye (C(d)) and amount of sorbent (m) were considered to be the three main factors at two different levels. It was found that all these factors and their intera...
متن کاملBentazon removal from aqueous solution by reverse osmosis; optimization of effective parameters using response surface methodology
Although bentazon is widely used as an agricultural herbicide, it is harmful to humans and poses many environmental threats. This study focused on the treatment of wastewater contaminated with bentazon pesticides using membrane technology. In this regard, low-pressure reverse osmosis (RO) was employed as it has already been used in the removal of other micro-pollutants. The effects of process v...
متن کاملPhotocatalytic Removal of Amaranth Optimization Using Response Surface Methodology
Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...
متن کاملResponse Surface Methodology for Optimizing Adsorption Process Parameters of Reactive Blue 21 onto Modified Kaolin
In this research modified Kaolin by Cetyltrimethylammonium bromide is used as an adsorbent for the removal of Reactive Blue 21 from aqueous solutions. Response Surface Methodology was used to study the effect of independent variables, such as Reactive Blue 21 dye concentration (20, 40, 60, 80 and 100 mg/L), time (10, 20, 30, 40 and 50), initial pH (2, 4, 6, 8 and 10) and modified Kaolin dosage ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil Engineering Journal
سال: 2018
ISSN: 2476-3055
DOI: 10.28991/cej-0309121