Optimization of post weld heat treatment cycle of fiber laser welded bainitic steel
نویسندگان
چکیده
منابع مشابه
Effect of Post-weld Heat Treatment on Joint Properties of Dissimilar Friction Stir Welded AA2024 and AA7075 Aluminum Alloys
In present study, the effect of heat treatment after friction stir welding dissimilar welds T6-7075 and T4-2024 aluminum alloys were investigated. Friction stir welding was performed at a constant rotation speed of 1140 rpm and welding speed 32 mm/min. After welding samples are taken under various heat treatment processes at different aging temperature and time period. Microstructural observati...
متن کاملEffect of Post-weld Heat Treatment on Joint Properties of Dissimilar Friction Stir Welded AA2024 and AA7075 Aluminum Alloys
In present study, the effect of heat treatment after friction stir welding dissimilar welds T6-7075 and T4-2024 aluminum alloys were investigated. Friction stir welding was performed at a constant rotation speed of 1140 rpm and welding speed 32 mm/min. After welding samples are taken under various heat treatment processes at different aging temperature and time period. Microstructural observati...
متن کاملThe effect of heat input on the microstructure and hardness of continuous fiber laser welded high Al-content δ-TRIP steel
Recent research suggests that extraordinary combinations of strength and ductility can be achieved in the so-called TRIP steels. With the development of these steels, welding with small weld nugget size and acceptable strength are needed. For these reasons present study was carried out to investigate the effect of heat input onweld size, microstructure and the hardness of the welded metal of 0....
متن کاملThe effect of heat input on the microstructure and hardness of continuous fiber laser welded high Al-content δ-TRIP steel
Recent research suggests that extraordinary combinations of strength and ductility can be achieved in the so-called TRIP steels. With the development of these steels, welding with small weld nugget size and acceptable strength are needed. For these reasons present study was carried out to investigate the effect of heat input onweld size, microstructure and the hardness of the welded metal of 0....
متن کاملCrystallographic Texture of Induction-welded and Heat-treated Pipeline Steel
The Charpy energy of the sample after heat–treatment was significantly higher than the as–welded sample when the V–notches were located 1 or 3 mm away from FL. However, when the V–notch was located on FL, the improvement in toughness from the heat treatment was not so obvious with no enhancement noted for the test temperature of −40 ◦C. Under this condition, the facets of the fracture surface a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2020
ISSN: 2267-1242
DOI: 10.1051/e3sconf/202018401039