OPTIMIZATION OF OPERATION PARAMETERS OF 80-KEV ELECTRON GUN
نویسندگان
چکیده
منابع مشابه
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys
Electron beam welding has shown a remarkable job in the space industry for welding of components. It is performed under a vacuum environment that eliminates foreign matter such as hydrogen, oxygen, and other gases. Joining of similar and dissimilar materials is the main advantage of electron beam welding with high depth to width ratio as well as sharp focus at the point where parts are to be we...
متن کاملRADIATION SHIELDING FOR THE 100 keV ELECTRON GUN OF THE HAMPTON
Minnae Chabwera: NASA Undergraduate Research Scholar Advisor: Dr. Paul Guèye Institution: Hampton University Hampton, VA 23668 Introduction The research conducted under the guidance of Dr. Paul Guèye involved the construction of a Low Energy Electron Accelerator (LELIA) spearheaded by the Physics Department at Hampton University. The aim of this research has been to reactivate a thermionic gun...
متن کاملOptimization of Cutting Parameters in Boring Operation
In the present work an attempt is made to select the combination of optimum cutting parameters which will result in better surface finish. Machining with optimum cutting parameters will result in minimum machining time and hence increasing the productivity. Four parameters viz. spindle speed, feed, depth of cut and length to diameter (L/D) ratio of boring bar has been taken as control factors. ...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
Operation of the Aps Rf Gun
The Advanced Photon Source (APS) has a thermioniccathode rf gun system capable of providing beam to the APS linac. The gun system consists of a 1.6-cell thermionic-cathode rf gun, a fast kicker for beam current control, and an alpha magnet for bunch compression and injection into the APS linac line. This system is intended for use both as an injector for positron creation, and as a first beam s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Engineering and Technology
سال: 2014
ISSN: 1738-5733
DOI: 10.5516/net.06.2013.092