Optimization of Low-Voltage Metallized Film Capacitor Geometry
نویسندگان
چکیده
منابع مشابه
Metallized Film Capacitor Lifetime Evaluation and Failure Mode Analysis
One of the main concerns for power electronic engineers regarding capacitors is to predict their remaining lifetime in order to anticipate costly failures or system unavailability. This may be achieved using a Weibull statistical law combined with acceleration factors for the temperature, the voltage, and the humidity. This paper discusses the different capacitor failure modes and their effects...
متن کاملThermal simulation for geometric optimization of metallized polypropylene film capacitors
In this paper, we use an analytic model to calculate the losses in the metallized polypropylene film capacitors. The model is validated experimentally for capacitors having the same capacitance but different geometry. For each group of capacitors a temperature distribution in the roll is assumed with the aim of optimizing its thermal performance. It appears that the heating of a long capacitor ...
متن کاملLow-voltage Switched-capacitor Resonators
The recent explosion of interest in wireless personal communication systems motivates the development of fully integrated radio receivers. The parallel reduction of the feature sizes in CMOS technology, and hence higher levels of integration. enable the combined integration of a bandpass or baseband analog-to-digital converter with the traditional front-end receiver building blocks. While ths t...
متن کاملLow-voltage switched-capacitor circuits
One of the key limitations of state-of-the-art fine linewidth CMOS technologies is the restricted power-supply voltage, limited by the low junction-breakdown voltage of the process and by the thin gate oxide, prone to voltage stress and breakdown. Also, in some applications, the available external power source may limit the supply voltage; for example, this source may be a 1.2 V battery, with a...
متن کاملCapacitor-less Low Dropout Voltage Regulator
The study of power management techniques has increased drastically within the last few years corresponding to the vast increase in the use of portable, handheld battery applications. These power management systems typically contain several LDO voltage regulators that require large external capacitors. The large external capacitors can not be fully integrated in standard CMOS technologies and hi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Magnetics
سال: 2007
ISSN: 0018-9464
DOI: 10.1109/tmag.2007.892473