Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique
نویسندگان
چکیده
منابع مشابه
Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique
Fused deposition modelling (FDM) is a fast growing rapid prototyping (RP) technology due to its ability to build functional parts having complex geometrical shapes in reasonable build time. The dimensional accuracy, surface roughness, mechanical strength and above all functionality of built parts are dependent on many process variables and their settings. In this study, five important process p...
متن کاملStudy on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality
3D printing known as additive manufacturing (AM) has been applied for applications in different fields such as aerospace, automotive, biomedical, and energy industries. It is the fact that 3D printing has gained a very wide acceptance over the last decade. However, several significant hurdles prevent its wider adoption. One of the most important barriers is the quality of the printed parts. Cur...
متن کاملStudy of parametric optimization of fused deposition modelling process using response surface methodology
FDM(fused deposition modelling) is a RP(rapid prototyping)technique used to manufacture prototypes on additive manufacturing technology.The material used is ABS(acronitirile butadiene styrene) plastic.The prototypes are made layer by layer addition of semi molten plastic and their joining by diffusion welding.In the present study effect of different parameters on response is studied.RSM(respons...
متن کاملComparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Polyetherimide (PEI) blends modified by either polycarbonate (PC) or polyethylene terephthalate glycol-modified (PETG) were prepared. The latter modifier (PETG) was an industrial grade widely used for fused deposition modelling (FDM) printing. PEI blends were compared to Ultem 9085, which is the standard PEI grade for FDM printing in advanced applications. All the blends were thoroughly charact...
متن کاملMetallization on FDM Parts Using the Chemical Deposition Technique
Metallization of ABS (acrylonitrile-butadiene-styrene) parts has been studied on flat part surfaces. These parts are fabricated on an FDM (fused deposition modeling machine) using the layer-wise deposition principle using ABS as a part material. Electroless copper deposition on ABS parts was performed using two different surface preparation processes, namely ABS parts prepared using chromic aci...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Intelligent Information Management
سال: 2009
ISSN: 2160-5912,2160-5920
DOI: 10.4236/iim.2009.12014