Optimization of Friction Surfacing Process Parameters for AA1100 Aluminum Alloy Coating with Mild Steel Substrate Using Response Surface Methodology (RSM) Technique
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Tool Steel M2 Coating on Mild Steel by Friction Surfacing
Friction surfacing is an emerging surface engineering technology, developed on the basic principle of friction welding, for depositing wear and corrosion resistant metallic coatings. In the present work coating of tool steel M2 were made on mild steel by friction surfacing by using 2 factorial designs with 3 factors at two levels for each. Process parameters developed a satisfactory deposition ...
متن کاملOptimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology
Centrifugal casting is one of the advanced casting branches widely used in the metallurgical industry in which the centrifugal force helps strengthen the workpiece material. The present work attempt to study the effect of the horizontal and vertical centrifugal casting parameters included the centrifugal mold rotation speeds and G-factors values on the quality of the product. The work has been ...
متن کاملRoasting Process Optimization of Walnut Kernels for the Preparation of Walnut Cream Using Response Surface Methodology
Roasting has considerable effects on the quality of cream made of nuts. In this study, the roasting conditions of walnut kernels were optimized based on the stability parameters of the produced cream. Temperatures of 100-150°C for 10-30 minutes were used to roast walnut kernels. The amount of oil separation, peroxide, acidity and Thiobarbituric acid values of the cream, as well as color paramet...
متن کاملOptimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...
متن کاملOptimization of Process Parameters for Gas Tungsten Arc Welding of AA1100 Aluminium Alloy
This paper aims at optimization of process parameters for gas tungsten arc welding (GTAW) of sheet samples of Aluminium alloy AA1100 using AC wave with Argon as inert gas. Tensile properties of parent and welded specimens were determined as per ASTM-E8M standard. Taguchi approach was applied to determine most influential control parameters which will yield better tensile strength of the joints ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modern Applied Science
سال: 2012
ISSN: 1913-1852,1913-1844
DOI: 10.5539/mas.v6n2p69