OPTIMIZATION OF FINNED TUBES IN AIR COOLERS
نویسندگان
چکیده
منابع مشابه
Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection
This paper presents a three-dimensional numerical and experimental geometric optimization study to maximize the total heat transfer rate between a bundle of finned tubes in a given volume and external flow, for staggered arrangements of circular and elliptic tubes. Experimental results were obtained for circular and elliptic configurations with twelve tubes, starting with an equilateral triangl...
متن کاملMechanism of Crystallization Fouling during Pool Boiling of Finned Tubes
The formation of deposits on heat transfer surfaces is the main hurdle in optimum operation of thermal desalination units. It is, therefore, common practice to operate these units i.e. MSF under sub-atmospheric pressure to boil saline water below saturation temperature of which depositions occurs. However this comes with high price-tag for excessive use of energy for pumping. Alternative and en...
متن کاملEnergy Aspects in the Design of Air Coolers for Indirect Refrigeration Systems
In this paper a model for the performance prediction and optimization of air coolers for indirect refrigeration systems is presented. The model applies for finned rube air coolers operating under frosting conditions and considers the transient heat and mass transfer between humid air and air cooler surfaces. The model is extended with an energy consumption analysis for the compression refrigera...
متن کاملOptimization of a Residential Air Source Heat Pump using Heat Exchangers with Small Diameter Tubes
Heat exchangers play significant role in refrigeration and air conditioning systems. Ongoing research aims to improve, or at least maintain, the system performance while reducing the size, weight and cost of the heat exchangers. This in turn leads to lower system refrigerant charge and reduced environmental impact. Using heat exchangers with small tube diameters (less than 5 mm) instead of larg...
متن کاملMulti-objective Crashworthiness Optimization of the Aluminum Foam-filled Tubes
In order to reduce both the weight of vehicles and the damage of occupants in a crash event simultaneously, it is necessary to perform a multi-objective optimization of the automotive energy absorbing components. In this paper, axial impact crushing behavior of the aluminum foam-filled thin-walled tubes are studied by the finite element method using commercial software ABAQUS. Comparison of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modern Technologies and Scientific and Technological Progress
سال: 2019
ISSN: 2686-9896,2686-9896
DOI: 10.36629/2686-9896/2019-1-1-110-111