Optimization of energy requirements for CO2 post-combustion capture process through advanced thermal integration
نویسندگان
چکیده
منابع مشابه
Energy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture
Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...
متن کاملCapital Costs and Energy Considerations of Different Alternative Stripper Configurations for Post Combustion Co2 Capture
Capturing and storing the greenhouse gas carbon dioxide (CO2) produced by power plants and factories before it is emitted to the atmosphere could play a major role in minimizing climate change. Among of the different technologies, aqueous amine absorption/stripping is a promising one. In this study 5 different configurations for aqueous absorption/stripping have been compared with regard to cap...
متن کاملControl of a post-combustion CO2 capture plant during process start-up and load variations
Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorp...
متن کاملWet impregnation of a commercial low cost silica using DETA for a fast post-combustion CO2 capture process
This work presents an economic and simple method to manufacture low cost, but effective adsorbents for CO2 capture through impregnating DETA to a low cost, porous silica gel. The results have demonstrated that the low cost silica gel impregnated by low molecular-weight amine is stable and work very well at a temperature up to 130 C. The developed adsorbent has a fast adsorption kinetics and can...
متن کاملSystems Analysis of Ionic Liquids for Post-combustion CO2 Capture at Coal-fired Power Plants
The main objective of this study is to investigate the feasibility and costs of ionic liquid (IL)-based CO2 capture systems at pulverized coal-fired (PC) power plants. The IL selected for this assessment is trihexyl(tetradecyl)phosphonium 2-cyanopyrrolide ([P66614][2-CNpyr]), achieving a 1:1 and reversible chemical reaction between [2-CNpyr] and CO2. A multi-stage equilibrium-based modeling fra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel
سال: 2021
ISSN: 0016-2361
DOI: 10.1016/j.fuel.2020.118940