Optimization of Draft Tube Position in a Spouted Bed Reactor using Response Surface Methodology
نویسندگان
چکیده
منابع مشابه
Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology
Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...
متن کاملDrying of Matricaria recutita Flowers in Vibrofluidized Bed Dryer: Optimization of Drying Conditions Using Response Surface Methodology
Drying of Matricaria recutita flower was investigated experimentally in a VibroFluidized Bed Dryer (VFBD). The aim of the present work was to optimize the best operating conditions for the drying of Matricaria recutita flower in the VFBD based on experimental design techniques. Response Surface Methodology (RSM) and Central Composite Design (CCD) based on 4-variable with 5-level have been e...
متن کاملHydrodynamics And Heat Transfer Characteristics Of Draft Tube Spouted Bed Roasting Of Groundnuts (Arachis Hypogeae)
The hydrodynamic characteristics of flow regime were studied employing different draft tubes during the spouted bed roasting of groundnuts and the dimensionless parameters were employed for predicting the flow regime. The estimated Reynolds's number (Re) under the turbulent convection regime was ≈ 8399. The size of the draft tubes employed ranged from 0.175 to 0.375 m length and 0.065 m diamete...
متن کاملInvestigation of a Cold Model of Internally Circulating Fluidized Bed with Draft Tube to be used as a two-Zone Fluidized Bed Reactor
In this research, a cold model of internally circulating fluidized bed is investigated. The aim is to find the effects of some of the operating parameters on the performance of the reactor. Experiments were carried out in a glass column (30 mm i.d. and 25 cm height) with a centrally located draft tube (11 mm i.d. and 5 or 7 cm height). The bed was loaded with white silica particles (dp = 0.15 -...
متن کاملOptimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Physics and Chemistry
سال: 2012
ISSN: 2162-531X,2162-5328
DOI: 10.4236/ampc.2012.24b059