Optimization of a Self-Excited Pulsed Air-Water Jet Nozzle Based on the Response Surface Methodology
نویسندگان
چکیده
منابع مشابه
Optimization of Nusselt Number of Al2O3/Water Nanofluid Using Response Surface Methodology
This study has primarily aimed at the examination of the effect of flow rate, solid volume fraction and their interactions on the Nusselt number of Al2O3/water nanofluids. To investigate the main and interaction effects on the response, Response Surface Methodology (RSM) has been used based on the miscellaneous design. By using the analysis of variance (ANOVA) the signi...
متن کاملPhotocatalytic Removal of Amaranth Optimization Using Response Surface Methodology
Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...
متن کاملOptimization of fluoride in water using alum with response surface methodology
Introduction: Fluoride counts an essential element for human health. Therefore, both low and excessive concentrations of that element in drinking water may cause health problems for the consumers. The present study aims to optimize fluoride base in drinking water using Alum response surface methodology. Methods: The present study is an analytical research which uses surface response method b...
متن کاملOptimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology
Research has shown that many Bentonite in Nigeria are unsuitable for oil well drilling in their natural states. Their modification and blends with some additives could increase the yield and boost their suitability. Many indigenous polymers have become very popular due to environmental friendliness and their ability to modify rheology of clay suspension. However, the common natural polymers are...
متن کاملCoexisting arsenate and arsenite adsorption from water using porous pellet adsorbent: Optimization by response surface methodology
Mesoporous pellet adsorbent developed from mixing at an appropriate ratio of natural clay, iron oxide, iron powder, and rice bran was used to investigate the optimization process of batch adsorption parameters for treating aqueous solution coexisting with arsenate and arsenite. Central composite design under response surface methodology was applied for optimizing and observing both individual a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strojniški vestnik – Journal of Mechanical Engineering
سال: 2021
ISSN: 0039-2480
DOI: 10.5545/sv-jme.2020.6995