Optimization Method for Double-sided Polishing Process based on Kinematical Analysis
نویسندگان
چکیده
منابع مشابه
Achievement of High Flatness of Large Diameter Silicon Wafer in Double-sided Polishing -optimization of Polishing Conditions Based on Kinematical Analysis-
INTRODUCTION Semiconductor devices require silicon (Si) wafers as the substrates to be manufactured with very high flatness for miniaturizing the design rule. On the other hand, the size of wafer is increasing for raising the number of device chips per a wafer for reduction of the process cost. Recently, 300 mm diameter wafers are mainly manufactured, and the feasibility study for 450 mm diamet...
متن کاملDesign Optimization and Construction of Double-Sided Linear Induction Motor
Linear induction motors have single and double-sided structures which are used in special applications, according to their advantages and disadvantages. Due to advantages such as lack of normal forces in double-sided type, these motors are more controllable and popular than the single-sided type, especially for transportation applications. In literature, single-sided linear induction motors ha...
متن کاملModeling and Optimization of Laser Polishing Process
Laser polishing is a finishing process based on melting material, with the objective of improving surface topography. Some operating parameters must be taken into consideration, such as laser power, feed rate, offset, and overlapping. Moreover, because of its dependence on the primary process, the initial topography has also an impact on the final result. This study describes a quadratic model,...
متن کاملA New Hybrid Conjugate Gradient Method Based on Eigenvalue Analysis for Unconstrained Optimization Problems
In this paper, two extended three-term conjugate gradient methods based on the Liu-Storey ({tt LS}) conjugate gradient method are presented to solve unconstrained optimization problems. A remarkable property of the proposed methods is that the search direction always satisfies the sufficient descent condition independent of line search method, based on eigenvalue analysis. The globa...
متن کاملA TWO-STAGE SIMP-ACO METHOD FOR RELIABILITY-BASED TOPOLOGY OPTIMIZATION OF DOUBLE LAYER GRIDS
For reliability-based topology optimization (RBTO) of double layer grids, a two-stage optimization method is presented by applying “Solid Isotropic Material with Penalization” and “Ant Colony Optimization” (SIMP-ACO method). To achieve this aim, first, the structural stiffness is maximized using SIMP. Then, the characteristics of the obtained topology are used to enhance ACO through six modific...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2016
ISSN: 2212-8271
DOI: 10.1016/j.procir.2015.12.043