Optimization and characterization of the properties of treated avocado wood flour-linear low density polyethylene composites

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites

In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...

متن کامل

High-density Polyethylene-based Composites with Pressure-treated Wood Fibers

High-Density Polyethylene (HDPE)-based composites with alkaline copper quaternary (ACQ)and micronized copper quaternary (MCQ)treated wood fibers were manufactured through injection molding. The mechanical properties, water absorption, and biological resistance properties of the fabricated composites with different coupling treatments were investigated. Composites with ACQand MCQ-treated wood ha...

متن کامل

Preliminary study of the physical and mechanical properties of soya stalk flour/high density polyethylene composite

The use of agriculture residues as filler in composites is increasing due to their strength, abundance and low cost. Soya stalks show promising renewable natural fiber. In polyethylene composites the physical and mechanical properties (flexural resistance, tensile, impacted absorbed energy, water uptake and thickness swelling) was examined at different composites. The results showed that, the m...

متن کامل

Effects of Fungicides on Mold Resistance and Mechanical Properties of Wood and Bamboo Flour/High- Density Polyethylene Composites

The main objective of this study was to determine the mold resistance and mechanical properties of fungicide-treated wood and bamboo flour/high density polyethylene (HDPE) composites. Zinc borate (ZB), 4,5-dichloro2-octyl-isothiazolone (DCOIT), zinc pyrithione (ZPT), and carbendazim (MBC) were used as fungicides. Then, treated and untreated samples were exposed to mold fungi (Aspergillus niger,...

متن کامل

Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour - High-density Polyethylene Composites

In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Alexandria Engineering Journal

سال: 2019

ISSN: 1110-0168

DOI: 10.1016/j.aej.2019.08.004