Optimisation of waste vegetable oil-based thermoset polymers
نویسندگان
چکیده
منابع مشابه
Biodegradation Behavior of Some Vegetable Oil-based Polymers
The potential biodegradability of several vegetable oil-based polymers was assessed by respirometry in soil for 60–100 days at temperatures of 30–58 C. Films of soybean oil and linseed oil which were oxidatively polymerized (Co catalyst) on a kraft paper support were 90%–100% mineralized to CO2 after 70 days at 30 C. Mineralization of polymerized tung oil to CO2 was much slower than soy or lins...
متن کاملBio Diesel from Waste Vegetable Oil
The world is confronted with the twin crises of fossil fuel depletion and environmental degradation. The indiscriminate extraction and consumption of fossil fuels have led to a reduction in petroleum reserves. Alternative fuels, energy conservation and management, energy efficiency and environmental protection have become important in recent years. The increasing import bill has necessitated th...
متن کاملDuctile thermoset polymers via controlling network flexibility.
We report the design and synthesis of a polymer structure from a cross-linkable epoxy-ionic liquid system which behaves like a hard and brittle epoxy thermoset, perfectly ductile thermoplastic and an elastomer, all depending on controllable network compositions.
متن کاملPerformance evaluation of waste fried vegetable oil in a medium grade low heat rejection diesel engine
Investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (LHR) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].The engine had different operating conditions...
متن کاملToughening of thermoset polymers by rigid crystalline particles
The toughening of an aromatic amine-cured diglycidyl ether of bisphenoI-A epoxy with particles of crystalline polymers was studied. The crystalline polymers were poly(butylene terephthalate), nylon 6, and poly(vinylidene fluoride). Nylon 6 and poly(vinylidene fluoride) were found to toughen the epoxy about as well as did an equivalent amount of CTBN rubber. Poly(butylene terephthalate) was foun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Green Materials
سال: 2018
ISSN: 2049-1220,2049-1239
DOI: 10.1680/jgrma.17.00036