Optimisation of reactive dye removal by sequential electrocoagulation–flocculation method: comparing ANN and RSM prediction
نویسندگان
چکیده
منابع مشابه
Optimisation of reactive dye removal by sequential electrocoagulation-flocculation method: comparing ANN and RSM prediction.
The removal of Reactive Black 5 dye in an aqueous solution by electrocoagulation (EC) as well as addition of flocculant was investigated. The effect of operational parameters, i.e. current density, treatment time, solution conductivity and polymer dosage, was investigated. Two models, namely the artificial neural network (ANN) and the response surface method (RSM), were used to model the effect...
متن کاملRemoval of Reactive Red 24 Dye by Clean Electrocoagulation Process using Iron and Aluminum Electrodes
In this research, the efficiency of electrocoagulation treatment process using iron and aluminum electrodes to treat synthetic wastewater containing Reactive Red 24 (RR 24) was studied. The effects of parameters such as current density, pH, type of electrolyte, initial dye concentration, electrolyte concentration, temperature, and inter electrode distance on dye removal efficiency were investig...
متن کاملRemoval of hazardous reactive blue19 dye from aqueous solutions by agricultural waste
Low-cost grapefruit peel (Agricultural Waste) was used for removal of reactive blue19 dye fromaqueous solutions. The process was studied as a function of contact time, initial dye concentration andpH. Adsorption process was attained to the equilibrium within 45 min for initial dye concentrations of 50,75, and 100 mg L-1. An acidic medium was the optimum condition for adsorption of dye at roomte...
متن کاملReactive Dye Removal from Aqueous Solution by Sorption
* E-mail: [email protected] ABSTRACT Effluents of textile dyeing are characterized by intense colour, chemical oxygen demand, suspended solids and a variety of refractory matter, such as heavy metals and nonionic surfactants. Strong colours may reduce light penetration, thus affecting the growth of plants and having impact on invertebrate and other forms of wildlife. There are a large numbe...
متن کاملOptimizing functions of coagulants in treatment of wastewater from metalworking fluids: Prediction by RSM method
Background: Coagulation is a treatment procedure for metalworking fluids (MWFs). This study aimed to optimize coagulation using four coagulants and compare the results. Methods: In this research, the outputs of a coagulation procedure in chemical oxygen demand (COD) removal, turbidity, and the release of oil were investigated using four coagulants, ferric chloride (FeCl3), ferric sulfate (Fe2(...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Water Science and Technology
سال: 2011
ISSN: 0273-1223,1996-9732
DOI: 10.2166/wst.2011.280