OPTIMEX: Measurement of Detonation Front Curvature with a Passive Fiber Optical System
نویسندگان
چکیده
منابع مشابه
OPTIMEX: Measurement of Detonation Front Curvature with a Passive Fiber Optical System
The ability of a newly developed independent passive optical system OPTIMEX to measure the detonation front curvature is demonstrated on charges of pressed explosive A-IX-1 (RDX/ceresin-stearin mixture with 95/5 wt.%). The charges, with length to diameter ratios of from one to four, were prepared from cylinders with diameters of 21 mm, 30 mm, 40 mm and 50 mm pressed to a density of 1.66 g/cm3. ...
متن کاملDetonation Velocity Measurement with Chirped Fiber Bragg Grating
Detonation velocity is an important parameter for explosive, and it is crucial for many fields such as dynamic chemistry burn models, detonation propagation prediction, explosive performance estimation, and so on. Dual-channel detonation velocity measurement method and system are described. The CFBG sensors are pasted both on the surface and in the center of the explosive cylinder. The length o...
متن کاملPropose of a novel method to simulate and optimize a polymer optical fiber daylighting system
Optical fiber day lighting systems help the efficiency of using solar energy in the lighting system in domestic, industrial and agricultural sectors. A lot of work has been done on these systems, but the lack of a reliable simulation method to reduce the tolerance, time and cost is evident. In this regard, in this paper, a novel method based on two powerful Optifiber and Zemax software has bee...
متن کاملPrecise Optical Fiber Length Measurement System Based on Fresnel Reflection
In this study, a precise optical fiber length measurement system is proposed. The measurement technique is based on the measurement of relative Fresnel reflected light intensity in a test fiber. Time delayed optical reflected pulses are obtained from a single nanosecond pulse injected at the input due to the difference in lengths of the reference and test fibers. The lengths of the different op...
متن کاملMeasurement of Radiation Effects on Active and Passive Optical Fiber Components
− The present contribution is focused on the measurement of the degradation induced in the case of two splitters and two attenuators used in optical fiber communication systems, under gamma and neutron irradiation. The measurements were carried out at specific wavelengths (λ = 1310 nm and λ = 1550 nm) or over a spectral band (λ = 1510 – 1620 nm), in order to evaluate the wavelength dependence o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Central European Journal of Energetic Materials
سال: 2016
ISSN: 1733-7178,2353-1843
DOI: 10.22211/cejem/62776