Optimation Pressure Loss to Oil Production System with Electrical Submersible Pump (ESP) at the Well A SW Field Bojonegoro, East Java

Electrical Submersible Pump Analysis and Design

Case Services' software provides production optimization for a variety of different methods of artificial lift. This paper discusses the dominant factors in electrical centrifugal submersible pump design and monitoring. Emphasis is placed on three areas: • Well inflow performance behavior. • Fluid Pressure-Volume-Temperature and phase behavior. • Pump equipment performance specifications. An ex...

Optimal control strategies with nonlinear optimization for an Electric Submersible Pump lifted oil field

In an Electric Submersible Pump (ESP) lifted oil field, the ESP of each oil well should be operated inside its operating window. The total power consumed by the ESPs in the oil field should be minimized. The speed of the ESPs and the production choke valve opening should be optimally chosen for maximizing the total oil produced from the oil field. At the same time, the capacity of the separator...

The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition

The performance of the electric submersible pump (ESP) significantly affected by Gas Void Fraction (GVF). Thus, using of a Rotary Gas Separator (RGS) is a suitable solution for this issue. The performance of the RGS is function of different parameters such as geometry of impeller, rotating speed, boundary conditions, media viscosity and GVF. In this study, the influences of GVF, viscosity, ...

A Successful Experience in Optimization of a Production Well in a Southern Iranian Oil Field

The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition

The performance of the electric submersible pump (ESP) significantly affected by Gas Void Fraction (GVF). Thus, using of a Rotary Gas Separator (RGS) is a suitable solution for this issue. The performance of the RGS is function of different parameters such as geometry of impeller, rotating speed, boundary conditions, media viscosity and GVF. In this study, the influences of GVF, viscosity, and ...