Optimal Trajectory Planning for 2-DOF Adaptive Transformable Wheel
نویسندگان
چکیده
منابع مشابه
Optimal Trajectory Planning of a Box Transporter Mobile Robot
This paper aims to discuss the requirements of safe and smooth trajectory planning of transporter mobile robots to perform non-prehensile object manipulation task. In non-prehensile approach, the robot and the object must keep their grasp-less contact during manipulation task. To this end, dynamic grasp concept is employed for a box manipulation task and corresponding conditions are obtained an...
متن کاملTrajectory Planning for a Four-Wheel-Steering Vehicle
This paper develops a trajectory planning algorithm for a four-wheel-steering (4WS) vehicle based on vehicle kinematics. The flexibility offered by the steering is utilized fully in the trajectory planning. A two-part trajectory planning algorithm consists of the steering planning and velocity planning. The limits of vehicle mechanism and drive torque are taken into account. Simulation results ...
متن کاملResearch on time optimal trajectory planning of 7-DOF manipulator based on genetic algorithm
Trajectory planning is the basis of robot control. A robot with seven degrees of freedom is the object of study. The shortest time is taken as the trajectory optimization target. The joint trajectory planning is carried out by using B-spline curve. Under the constraint of kinematics parameters, the time optimization of the motion trajectory is realized by using the improved genetic algorithm. T...
متن کاملTime-jerk optimal trajectory planning of a 7-DOF redundant robot
In order to improve the efficiency and smoothness of a robot and reduce its vibration, an algorithm called the augmented Lagrange constrained particle swarm optimization (ALCPSO), which combines constrained particle swarm optimization with the augmented Lagrange multiplier method to realize time-jerk (defined as the derivative of the acceleration) optimal trajectory planning is proposed. Kinema...
متن کاملOptimal trajectory planning for industrial robots
An analysis of the results of an algorithm for optimal trajectory planning of robot manipulators is described in this paper. The objective function to be minimized is a weighted sum of the integral squared jerk and the execution time. Two possible primitives for building the trajectory are considered: cubic splines or fifth-order B-splines. The proposed technique allows to set constraints on th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2020
ISSN: 2169-3536
DOI: 10.1109/access.2020.2966767