Optimal surface texture design of journal bearing with axial grooves
نویسندگان
چکیده
منابع مشابه
Flow through the Grooves of Journal Bearings
A simple analysis of fully-developed Stokes ow in grooved bearings is performed that does not use lubrication scaling arguments as in Muijderman (1966). When the inertial terms are ignored, the Navier{Stokes equations decouple. The ow through the groove is then determined from a Poisson equation for the only component of velocity that contributes to the ow through the bearing. This velocity is ...
متن کاملStudy on Lubrication Performance of Journal Bearing with Multiple Texture Distributions
The lubrication performance of journal bearings with different sorts of uniformly distributed micro-spherical textures are studied in this paper. Geometries and dynamic models of journal bearings with pure concave/convex textures are developed. The validity of the proposed models is verified against the oil film pressure distribution from the literature. The effects of geometry parameters (the ...
متن کاملViscous Drag Reduction with Surface-Embedded Grooves
Turbulent drag reduction in wall-bounded flows is investigated experimentally by considering the dynamic effects provoked by large variation of anisotropy in the velocity fluctuations. It is shown that high drag reduction is obtained when the velocity fluctuations near the wall reach the statistically axisymmetric state with invariance under rotation about the axis aligned with the mean flow. D...
متن کاملOptimal Gabor filter design for texture segmentation
Texture segmentation involves accurately partitioning an image into differently textured regions. It requires simultaneous measurements in both the spatial and the spatial-frequency domains. Gabor filters are well recognized in the recent past as a joint spatial/spatial-frequency representation of textures. Daugman [16] has shown that Gabor filters have optimal joint localization in both the sp...
متن کاملOPTIMAL DESIGN OF COLUMNS FOR AN INTERMEDIATE MOMENT FRAME UNDER UNIAXIAL MOMENT AND AXIAL LOADS
The present study addresses optimal design of reinforced concrete (RC) columns based on equivalent equations considering deformability regulations of ACI318-14 under axial force and uniaxial bending moment. This study contrary to common approaches working with trial and error approach in design, at first presents an exact solution for intensity of longitudinal reinforcement in column section by...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Technology
سال: 2017
ISSN: 0392-8764
DOI: 10.18280/ijht.350206