Optimal Location of Actuators and Sensors in Active Vibration Control
نویسندگان
چکیده
منابع مشابه
Optimal Placement of Actuators and Sensors for Vibration Active Control
Optimal placement of actuators and sensors is an important issue in vibration active control. An index for joint consideration of controllability and observability based on singular values of Hankel matrix is described at first, then an objective function according to the index is defined for actuator and sensor placement. A genetic algorithm procedure (GA) is adopted to solve the optimization ...
متن کاملACTIVE NOISE AND VIBRATION CONTROL LITERATURE SURVEY: Sensors and Actuators
This study arose from the need to control noise in naval vessels to reduce their detectability and hence vulnerability to enemy attack. In this report a detailed review of sensor and actuator technologies that could be used for active noise and vibration control in ship structures has been provided. The review focused on a wide range of sensor and actuator materials, such as piezoelectric and e...
متن کاملActive vibration control using compliant-based actuators
In this work, an active vibration control method using compliant-based actuators is proposed for controlling a wide range of vibration and its noise-associated applications. The compliant-based actuator combines a conventional actuator with elastic elements, such as passive springs, that can be demonstrated to have better accuracy and robustness for force control compared to conventional stiff ...
متن کاملOptimal Vibration Control of a Model Frame Structure Using Piezoceramic Sensors and Actuators
This research concerns the active vibration control of a three-story model structural frame by using piezoceramics smart materials, in particular lead zirconate titanate (PZT), in the form of patches. These PZT patches are surface-bonded on the structure and function as actuators and sensors. To assist the control design, system identification is first performed. To excite the frame for identif...
متن کاملVibration Attenuation Timoshenko Beam Based on Optimal Placement Sensors/Actuators PZT Patches with LQR-MOPSO
The main objective of this study is to reduce optimal vibration suppression of Timoshenko beam under non-periodic step and impulse inputs. Cantilever beam was modeled by Timoshenko theory and finite element numerical method. Stiffness (K), mass (M), and damping (C) matrices are extracted. Then, in order to control structure vibration, piezoelectric patches were used due to simultaneous dual beh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Intelligent Material Systems and Structures
سال: 2005
ISSN: 1045-389X,1530-8138
DOI: 10.1177/1045389x05047989