Optimal Determination of Structural Dynamical Parameters Using Ambient Vibration
نویسندگان
چکیده
منابع مشابه
Determination of Optimal SVM Parameters by Using GA/PSO
The use of support vector machine (SVM) for function approximation has increased over the past few years. Unfortunately, the practical use of SVM is limited because the quality of SVM models heavily depends on a proper setting of SVM hyper-parameters and SVM kernel parameters. Therefore, it is necessary to develop an automated, reliable, and relatively fast approach to determine the values of t...
متن کاملtechnical and legal parameters for determination of river boundary,( case study haraz river)
چکیده با توسعه شهر نشینی و دخل و تصرف غیر مجاز در حریم رودخانه ها خسارات زیادی به رودخانه و محیط زیست اطراف آن وارده می شود. در حال حاضر بر اساس آئین نامه اصلاح شده بستر و حریم رودخانه ها، حریم کمی رودخانه که بلافاصله پس از بستر قرار می گیرد از 1 تا20 متر از منتهی الیه طرفین بستر رودخانه تعیین، که مقدار دقیق آن در هر بازه از رودخانه مشخص نیست. در کشورهای دیگر روشهای متفاوتی من جمله: درصد ریسک...
15 صفحه اولDetermination of Vibration Parameters in Moderate& Damped Systems
The undamped naturalfrequency CO, and the damping ratio [ can be determined from a plot of the jiee motion of the system. If the damping is light, ( < 0.2, the lqqarithmic decrement can be used to determine the coeficients. Systems with moderate damping are those in the range 0.2 < ( -C 1.2. A methodfor determining vibration parameters for systems with moderate damping is presented here. The me...
متن کاملA Study of Dynamic Characteristics of a Multistory Building Using Ambient Vibration Tests (TECHNICAL NOTE)
Dynamic characteristics of a typical multistory building in Iran have been studied in two different stages of building construction, using ambient vibration tests. Finite element models have also been used to determine these characteristics and to verify test results. The results indicated the agreements and also differences between conventional theoretical models and the behaviour of real stru...
متن کاملSelecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters
Tubular structural systems are one of the most common types of systems in high-rise structures. In the early days of this system, there were imperfections in its design which were overcome over time. The most important modification to rectify these defects is the use of a series of internal frames in addition to the peripheral frames and new systems in the center of the plan to eliminate design...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
سال: 2018
ISSN: 1309-1751
DOI: 10.17780/ksujes.344989