Optical shift register based on an optical flip-flop memory with a single active element
نویسندگان
چکیده
منابع مشابه
Optical shift register based on an optical flip-flop memory with a single active element.
We present an optical shift register that consist out of two serially connected optical flip-flop memories driven by common clock pulses. Each optical flip-flop consists out of two ring lasers sharing a single active element, which makes the optical flip-flops easily cascade with each other. The two cascaded optical flip-flops are controlled by the clock pulses in such a way that the input data...
متن کاملRobust optical control of an optical-amplifier-based flip-flop.
We demonstrate new optical techniques for externally controlling the latchable output power of a semiconductor-optical-amplifier-based flip-flop. Optical 'set' and 'reset' signals increase and decrease the re-fractive index, respectively, via cross-phase modulation (XPM). Set signals, which deplete the carrier density, have wavelengths between 1533 and 1568 nm, and powers as low as 22 microW. R...
متن کاملRemote optical control of an optical flip-flop.
We experimentally demonstrate control of a holding-beam-enabled optical flip-flop by means of optical signals that act in a remote fashion. These optical-control signals vary the holding-beam power by means of cross-gain modulation within a remotely located semiconductor optical amplifier (SOA). The power-modulated holding beam then travels through a resonant-type SOA, where flip-flop action oc...
متن کاملAll Optical Flip-Flop Based on Coupled Laser Diodes
An all optical set-reset flip flop is presented that is based on two coupled identical laser diodes. The lasers are coupled so that when one of the lasers lases it quenches lasing in the other laser. The state of the flip flop is determined by which laser is currently lasing. Rate equations are used to model the flip flop and obtain steady state characteristics. The flip flop is experimentally ...
متن کاملFast all-optical flip-flop based on a single distributed feedback laser diode.
Since there is an increasing demand for fast networks and switches, the electronic data processing imposes a severe bottleneck and all-optical processing techniques will be required in the future. All-optical flip-flops are one of the key components because they can act as temporary memory elements. Several designs have already been demonstrated but they are often relatively slow or complex to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2005
ISSN: 1094-4087
DOI: 10.1364/opex.13.009708