Optical Interference During rf-GDOES Depth Profiling of Anodized Aluminum-Tantalum Alloy Films
نویسندگان
چکیده
منابع مشابه
Depth-Profiling of Surface-Segregated Composition Spread Alloy Films
It is common for the components in a homogeneous metallic alloy to separate at its surface. This phenomenon is known as surface segregation. For example, under certain conditions, the surface layer of atoms in a Cu85Pd15 is pure copper, while the second layer of atoms is 50% copper. The bulk retains its 85/15 composition. A depth-profile characterizes the surface segregation by describing the a...
متن کاملControlled morphology of aluminum alloy nanopillar films: from nanohorns to nanoplates Short title: Aluminum alloy nanopillar films
Nanopillar films of Al-Nb alloys have been fabricated on substrates with a regular concave cell structure by oblique angle physical vapor deposition. The concave cell structure of substrate increases the shadow region for the flux of depositing atoms, assisting the formation of an isolated nanopillar on each cell. Depending upon the alloy composition and deposition angle, the pillar shape chang...
متن کاملEffect of welding parameters on penetration depth in FB-TIG welding of 5083 aluminum alloy
In the present study, effect of current, welding speed and preheat temperature during FB-TIG welding of AA5083 aluminum alloy was studied. Using the Taguchi method, 9 different tests were designed to investigate the effect of welding parameters on the penetration depth. Consistent with predictions, increasing the current and preheat temperature, and reducing the welding speed led to an increase...
متن کاملMorphology-induced plasmonic resonances in silver-aluminum alloy thin films
We have investigated the optical properties of sputter-deposited silver-aluminum alloy thin films on silicon substrates at room temperature. In addition to the primary feature that corresponds to the bulk plasma resonance, a secondary dip appears in the optical reflectance spectra, which shifts and diminishes with thermal annealing. Careful structural characterization of both the as-deposited a...
متن کاملEffect of welding parameters on penetration depth in FB-TIG welding of 5083 aluminum alloy
In the present study, effect of current, welding speed and preheat temperature during FB-TIG welding of AA5083 aluminum alloy was studied. Using the Taguchi method, 9 different tests were designed to investigate the effect of welding parameters on the penetration depth. Consistent with predictions, increasing the current and preheat temperature, and reducing the welding speed led to an increase...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Engineering and Performance
سال: 2013
ISSN: 1059-9495,1544-1024
DOI: 10.1007/s11665-013-0516-0