Optical fiber sensors for monitoring cement paste carbonation
نویسندگان
چکیده
Abstract The use of concrete has been widespread in our society housing and infrastructure, despite the environmental cost associated with its production. Its decay poses a social, economic, problem. Currently, carbonation cement paste is monitored through measurement pH, several optical fiber sensors (OFS) have produced for this purpose. In current work focus is, also, on monitoring an OFS, but not pH measurements. Single reflectance spectroscopy, previously employed to measure durability, used monitor discoloration caused by carbonation. As front reaches tip embedded paste, signal reflected onto increases. accelerated two limestone samples atmosphere 100% CO 2 was successfully monitored. applicability sensor operational ambient confirmed at 3% . cross interference from water ingress egress also evaluated, it didn’t hinder measurements Therefore, novel OFS capable measuring achieved.
منابع مشابه
Optical Fibers and Optical Fiber Sensors Used in Radiation Monitoring
By their very nature, optical fibers and, by extension, intrinsic and extrinsic optical fiberbased sensors are promising devices to be used in very different and complex environments considering their characteristics such as: capabilities to work under strong electromagnetic fields; possibility to carry multiplexed signals (time, wavelength multiplexing); small size and low mass; ability to han...
متن کاملFluorescent optical fiber sensors for cell viability monitoring.
A new simple method for non-invasive cell culture viability monitoring based on vital fluorescent stains is introduced, and its efficiency for long-term experiments on cells is demonstrated. In contrast to common methods for cell viability control, which are usually either destructive (like flow-type counters or dead cells coloring and counting), or hardly quantitative like fluorescent microsco...
متن کاملOptical Fiber Sensors for Aircraft Structural Health Monitoring
Aircraft structures require periodic and scheduled inspection and maintenance operations due to their special operating conditions and the principles of design employed to develop them. Therefore, structural health monitoring has a great potential to reduce the costs related to these operations. Optical fiber sensors applied to the monitoring of aircraft structures provide some advantages over ...
متن کاملApplication of Optical Fiber Sensors for Structural Monitoring and Control
Experimental result of a full scale-steel frame with a smart active control system under shaking table test has been carried out in this paper. Newly, the concept of smart structure has been broached to the extent of structure control. The NEURO-FBG control system, which is composed of both neural networks and fiber Bragg grating sensors, has been theoretically analyzed and simulated to effecti...
متن کاملWeight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2407/1/012038