Optical Effects of Pigmets in Coating Film Formation
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Film Formation in Tablet Coating
The application of a coating layer on a tablet is a commonly used technique to selectively control tablet characteristics. Among the most important functions of the coating is the regulation of the release of active ingredient. In the course of a typical coating process, the tablet passes a spray zone multiple times. Each time, a partial coating layer is applied. For each tablet, this is repeat...
متن کاملMemetic Algorithm Approach to Thin-Film Optical Coating Design
The problem of optimizing a series of thin-film layers in order to achieve a desired reflectivity of light over a range of frequencies is studied. The approach studied here is to employ an evolutionary algorithm combined with random local searches to obtain the best fit. This Memetic Algorithm is found to result in faster convergence than in the case when no local searches are employed.
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Optical sol-gel coatings : ellipsometry of film formation
2014 A method was developed to image an area of a drying, steady-state film during dip-coating using ellipsometry, thereby obtaining the film’s thickness and refractive index as a function of position. Measurements on TiO2 and SiO2 alcohol-based sols indicate that the film approaches a volume fraction 03A6 ~ 0.2 in the wet state and suggests that the film resists densifying further for kinetic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1974
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.47.224