Optical accelerometer for seismic measurement
نویسندگان
چکیده
منابع مشابه
Reproducibility of a triaxial seismic accelerometer (DynaPort).
PURPOSE To examine the reproducibility of a triaxial seismic accelerometer under controlled conditions and real-life conditions. METHODS Instrumental reproducibility was examined using a shaker device. The accelerometers (DynaPort MiniMod; McRoberts B.V., The Hague, The Netherlands) were shaken at four frequencies (0.8, 2.1, 3.6, and 4.6 Hz) in x- and y-directions. The magnitude of accelerati...
متن کاملSensor System with Accelerometer for Tilt Measurement
Presented paper describes design and realization of a sensor system for tilt measurement in x and y axes directions in the range of 680°. For construction non-standard connection with accele rometer is used. Measurement is controlled by a microprocessor, measured data are sent to a PC via RS232. The PC is used for data storage, further calculations and display of measured tilt. Convertor of log...
متن کاملTilt Measurement Using a Dual Axis Accelerometer
Rev.0 Circuits from the LabTM circuits from Analog Devices have been designed and built by Analog Devices engineers. Standard engineering practices have been employed in the design and construction of each circuit, and their function and performance have been tested and verified in a lab environment at room temperature. However, you are solely responsible for testing the circuit and determining...
متن کاملInclination Measurement Based on MEMS Accelerometer
MEMS accelerometer is very suitable for dip angle measurement with its small size, low power consumption and so on. The working principle of MEMS accelerometer was described in this study, and using the accelerometer to measure inclination was analyzed. Triaxial digital chip ADXL345 of acceleration was controlled via SPI mode driving using MSP430F149 microcontroller, and interface circuit and d...
متن کاملMEMS Navigation-Grade Electro-Optical Accelerometer
Accurately measuring displacement of mechanical components on micro-scale devices is often the limiting factor affecting resolution for many MEMS-based sensors including accelerometers, Coriolis-based gyroscopes, pressure sensors, temperature sensors, and magnetometers. This paper introduces a novel electro-optical displacement detection scheme which has been applied to navigation-grade MEMS ac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vibroengineering PROCEDIA
سال: 2018
ISSN: 2345-0533,2538-8479
DOI: 10.21595/vp.2018.20379