Operating Characteristics of Pulsed Gas Bubble Column with Perforated Plates
نویسندگان
چکیده
منابع مشابه
Metabolic modeling of synthesis gas fermentation in bubble column reactors
BACKGROUND A promising route to renewable liquid fuels and chemicals is the fermentation of synthesis gas (syngas) streams to synthesize desired products such as ethanol and 2,3-butanediol. While commercial development of syngas fermentation technology is underway, an unmet need is the development of integrated metabolic and transport models for industrially relevant syngas bubble column reacto...
متن کاملExperimental Study and CFD Simulation of Mass Transfer Characteristics of a Gas-Induced Pulsating Flow Bubble Column
Oxygen gas-liquid mass transfer coefficient was measured in a gas-induced pulsating flow bubble column. Pulsating amplitude had a great influence on kla under pulsating state of equal base flow and pulsating flow, which was enhanced up to 30 % compared with that under steady state; however, it had a negative effect on mass transfer under a fixed low base flow. It was also found that kla had a n...
متن کاملGas holdup in a gas-liquid-fiber semi-batch bubble column
A 4-m high, 15.24-cm diameter semi-batch bubble column connected to one of three perforated plate gas distributors with open area ratios A = 0.57%, 0.99%, and 2.14% is employed to study gas holdup and flow regime in Rayon and Nylon fiber suspensions. This study determines the effect of superficial gas velocity, fiber type, fiber mass fraction, fiber length, and aeration plate open area ratio on...
متن کاملAcoustic Transmission Loss of Perforated Plates
A study has been conducted on the acoustic response of perforated plates at normal incidence. The investigation includes a theoretical analysis of the problem, with validation through experimentation. The acoustic response was quantified through the transmission loss and absorption coefficient of the perforate. The theoretical analysis is based on planar wave propagation through a single contra...
متن کاملModeling of mass transfer characteristics of bubble column reactor with surfactant present.
Danckwert's method was used to determine the specific interfacial area, a, and the individual mass transfer coefficient, k(L), during absorption of CO(2) in a bubble column with an anionic surfactant in the carbonate-bicarbonate buffer solution and NaAsO(2) as catalyst, the presence of which decreases the specific interfacial area and the individual mass transfer coefficient. The specific inter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical engineering
سال: 1970
ISSN: 0375-9253
DOI: 10.1252/kakoronbunshu1953.34.856