Open Crack Formation in Rice with Cracked Endosperm and Cracked Surface during Soaking.
نویسندگان
چکیده
منابع مشابه
Crack opening analysis of complex cracked pipes
Based on the reference stress approach, two sets of the crack opening displacement (COD) estimation equations are proposed for a complex cracked pipe. One set of equations can be used for the case when full stressstrain data are known, and the other for the case when only yield and tensile strengths are available. To define the reference stress, a simple plastic limit analysis for the complex c...
متن کاملPatching repair with ECC on cracked concrete surface
Performance requirements of the patch repair material are strength, size stability, shieldability, durability, bond property with the substrate concrete, ductility and so forth. Various kinds of patch repair materials with short fibers have been developed and used. Engineered Cementitious Composites (ECC) which provides multiple cracking and strain hardening behavior is also one of the attracti...
متن کاملA Simple Method for Modeling Open Cracked Beam
Abstract A simple method is proposed to model the open cracked beam structures. In this method, crack is modeled as a beam element. Hence cracked beam can be assumed to be a beam with stepped cross sections, and problem of determining natural frequency and mode shape of cracked beam, can be solved as determining these characteristics for a beam with different length and cross section. With this...
متن کاملBehavior of cracked materials
Abstract. Due to their microstructure, quasi brittle materials present rough cracks. Under sliding of the crack lips, this roughness involves in one hand induced opening and in the other hand some apparent plasticity which is due to the interlocking of the crack lips combined with Coulomb’s friction. The proposed model is written under the irreversible thermodynamics framework. Micromechanics u...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON SHOKUHIN KAGAKU KOGAKU KAISHI
سال: 2001
ISSN: 1341-027X,1881-6681
DOI: 10.3136/nskkk.48.69