On Yarn Count and Twist Level of Throstle-Spun Yarn.
نویسندگان
چکیده
منابع مشابه
Production of Core Spun Yarn with Ring & Siro Spinning System
A common problem in production of core–spun yarns on the Ring spinning frame is the slippage of the staple fibers as sheath fibers relative to the core. This effect is known as ‘strip-back’ or barberpole. This problem may lead to an incomplete core coverage and results in end–breaks in subsequent processing. In order to avoid this problem, in the present work, core spun yarns (acrylic sheath fi...
متن کاملSelf-oscillations of carbon nanotube twist-yarn during field emission
A. M. Prokhorov General Physics Institute, RAS, 38 Vavilov Street, 119991 Moscow, Russia Department of Physics, M. V. Lomonosov Moscow State University, 119991 Moscow, Russia Materials Science and Engineering Department, Cornell University, Ithaca, NY 14850, USA Department of Physics and Mathematics, University of Joensuu, 80101 Joensuu, Finland The Alan G. MacDiarmid NanoTech Institute, Univer...
متن کاملA Study on Spinning Limits and Yarn Properties with Progressive Change in Yarn Count in Friction Spinning
The spinning limit for three different fibres (cotton, viscose rayon and polyester) on a Dref-3 friction spinning machine has been investigated. The change in yarn properties with progressive change in count has also been reported. The count range has been seen to be dependent on fibre type. As one progresses from very coarse to fine counts, the yarn tensile property remain fairly unaltered for...
متن کاملImpact of Carding Parameters and Draw Frame Doubling on the Properties of Ring Spun Yarn
The impact of card cylinder speed, card production rate and draw frame doubling on cotton yarn quality parameters was investigated by using the BoxBehnken experimental design. It was found that yarn tenacity, elongation and hairiness increase by increasing the number of draw frame doubling up to a certain level and then decrease by further increase in doubling. Yarn unevenness increased by incr...
متن کاملEffects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns
Regarding the importance of ring spinning method among spinning systems, great potentials exist for research about on the improvement of the quality and properties of ring spun yarn. This study aims to improve yarn quality by changing the shape and dimensions of spinning triangle through forming a groove in the middle zone of the front darfting roller with a curvature of 5 to 7 mm. For the to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan)
سال: 1994
ISSN: 0371-0580,1880-1994
DOI: 10.4188/transjtmsj.47.4_t83