On the Use of Conformal Cooling in High-Pressure Die-Casting and Semisolid Casting
نویسندگان
چکیده
Today, tool life in high pressure die casting (HPDC) is of growing interest. A common agreement that primarily decided by the thermal load and temperature gradients materials. Conformal cooling with growth additive manufacturing has raised interest as a means extending life. In current paper, conformal channels’ performance effect on cycle high-pressure rheocasting are investigated for conventional HPDC semisolid processing. It was found aids reduction, use spray may be reduced support die-life extension. For filling, increased possibly counterproductive. Instead, it main focus should focused to manage around in-let bushing runner system. Due possible higher inlet pressures casting, particular benefits could seen.
منابع مشابه
Semisolid Processing of Al/β-SiC Composites by Mechanical Stirring Casting and High Pressure Die Casting
متن کامل
Materials on Dies for Pressure Die Casting
In the contribution the stress of die materials of thermal fatigue is defi ned and material life is derived theoretically and compared with the measured values. The important properties of the die materials as thermal conductivity, coeffi cient of thermal expansivity, modulus of elasticity and mechanical properties are described. Binding to it single die materials as carbon steels and chrome-tu...
متن کاملAluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting
Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pr...
متن کاملHigh pressure die casting of Fe-based metallic glass
Soft ferromagnetic Fe-based bulk metallic glass key-shaped specimens with a maximum and minimum width of 25.4 and 5 mm, respectively, were successfully produced using a high pressure die casting (HPDC) method, The influence of die material, alloy temperature and flow rate on the microstructure, thermal stability and soft ferromagnetic properties has been studied. The results suggest that a stee...
متن کاملApplication of TPM indicators for analyzing work time of machines used in the pressure die casting
The article presents the application of total productive maintenance (TPM) to analyze the working time indicators of casting machines with particular emphasis on failures and unplanned downtime to reduce the proportion of emergency operation for preventive maintenance and diagnostics. The article presents that the influence of individual factors of complex machinery maintenance (TPM) is ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Technologies (Basel)
سال: 2021
ISSN: ['2227-7080']
DOI: https://doi.org/10.3390/technologies9020039